YAESU SCU-40 YAESU SCU-40 WiRES-X Connection Cable Kit For FTM-400 And FTM-100 Series Radios

To properly set up a Portable Digital Node Station with the FTM-400XD, FTM-400D, and FTM-100D, the SCU-40 WiRES-X connection cable kit is required. Contents of SCU-40: SCU-20 & Speaker/ Mic jack cables Users can easily establish and operate a WiRES-X Portable Node Station by directly connecting the FTM-400XD, FTM-400D, and FTM-100D to the PC with the SCU-40. Same as the WiRES-X Portable Node with the FT2D, four (4) different types of operation modes are available. For more detailed information, please refer to the latest operation manual which is posted on Yaesu's official website (http://www.yaesu.com). Yaesu will be releasing videos showing the firmware updating procedure and operation of the radios. Please also be informed that the latest WiRES-X PC software (Ver 1.51) has been released along with the latest firmware of the FTM-400XD/FTM-400D and FTM-100D. This software contains some improvements and optimizations to operate a WiRES-X PDN (Portable Digital Node) with the C4FM transceivers – FTM-400XD, FTM-400D, FTM-100D and FT2D and a fixed WiRES-X node station with HRI-200. (http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=108&encProdID=1D23D01F7B34D76072988D9857AA1A7C&DivisionID=65&isArchived=0) With the Portable Digital Node function, the flexibility and mobility of the WiRES-X Network will be available all thetime.