YAESU M-70 Yaesu Desktop Microphone

Yaesu M-70 Desktop Microphone  The M-70 utilizes a directional condenser microphone element which has a precisely tuned the frequency response to obtain clear and crisp audio quality The PTT uses three Air-Cylinder tubes similar to the Reference Microphone M-1 to provide a solid and smooth extended operation A simple one-touch PTT keylock button is placed just above the PTT key for those long rag chews Built-in Low-Cut filter allows to shaping of the low frequency response (cut off at 340Hz, -6dB/octave). ON/ OFF is selectable by a sliding switch located on the bottom of the microphone An isolation transformer is integrated in the circuit board to enhance the audio quality The M-70 is compatible with all YAESU HF transceivers equipped with round 8-pin microphone connector or 8-pin modular microphone connector. Specifications: Microphone Type: Condenser microphone Supply Voltage: DC 5.0 V ±10 % Frequency Response: 30 - 17000Hz Sensitivity: - 60 dB( 1kHz 0 dB=1V/1Pa) Microphone Impedance: 600 Ohms Dimensions (W x H x D): 4.17" x 6.69" x 4.98" (W106 x H170 x D126.5 mm) * H: (Maximum with microphone flat) Weight: 15.87 oz ( 450 g) w/o cable Compatible Transceivers:  FTDX101 series FTDX10 FTDX9000 series FTDX5000 series FTDX3000D FTDX1200 FT-991/A FT-891 FT-450/D FT-857/D, FT-818ND, FT-817/ND FT-2000/D FT-1000MP, FT-1000MP MARK-V FT-950, FT-920, FT-900, FT990* FT-897/D, FT-847 FT-1000* FT-850 / FT-890* FT-840* FT-747* *Require the optional Power Supply Kit ABB19X00 Supplied Accessories: Microphone Cable (Round 8-pin to 8-pin modular jack) Operating Manual