RKB-7410 Repack ICOM IC-7410 100W HF + 6m Transceiver, Internal Antenna Tuner (ATU)

  RKB-7410 Repack ICOM IC-7410 100W HF + 6m Transceiver, Internal Antenna Tuner (ATU)   Icom Factory Reconditioned-Condition B     REPACK “B” CONDITION   Slightly used to used appearance, may have some minor scratches Original Gift box may not be included.  (Box may have dents, writing, shipping labels, etc.) ALL MAJOR Accessories included: Base and Mobiles – Power cable and microphone HH’s – Antenna, Battery and Charger MAY NOT have the Owner’s Manual (Downloadable from IA website) 90-DAY Warranty from date of consumer purchase, must have proof of purchase         IC-7410 HF/50 MHz 100w Transceiver  The IC-7410 has been designed as an HF/50MHz specialized rig with excellent performance and features in this category. The IC-7410 employs high grade DSP unit and double conversion super-heterodyne system developed from the latest technology used in our higher grade rigs such as the IC-7800/7700/7600 series. In addition, the IC-7410 comes with a built-in 15kHz 1st IF filter and can accept up to two optional filters (3kHz/6kHz). When used with these 1st IF filters, narrow mode signals such as the CW and SSB modes are protected from adjacent strong signals. Major features +30dBm 3rd order intercept point (in 14MHz band) Double conversion superheterodyne system improves inband IMD characteristics 32-bit floating point DSP unit Built-in 15kHz first IF filter and optional 3kHz and 6kHz first IF filters Large monochrome LCD display ±0.5ppm frequency stability Built-in simple band scope Built-in automatic antenna tuner All mode (SSB/CW/RTTY/AM/FM) Optional RS-BA1 for IP remote control Faster DSP unit and in-house DSP expertise The IC-7410 employs a much higher speed DSP unit compared to the IC-746PRO/7400's DSP unit. The AD/DA converter AK4620B allows for a high dynamic range and superior S/N ratio. Icom has many years of DSP expertise, and has been key in development of the technology. The IC-7410 represents the latest in digital achievement and performance.     Double-conversion superheterodyne The IC-7410 employs a double conversion superheterodyne system which has an image rejection mixer for the 2nd mixer stage. When compared to a typical triple-conversion system, signal distortion is dramactically reduced.   +30dBm third-order intercept point (IP3) Icom's analog RF circuit experience  combined with the latest DSP software technology results in +30dBm IP3 equivalent to the IC-7600. Even in tough RF conditions, such as interference by broadcast stations or strong neighboring ham stations, a weak signal can be clearly received by the IC-7410. Three first IF filters (3/6/15kHz)* The IC-7410 comes with a built-in 15kHz 1st IF filter and can accept up to two optional filters (3kHz FL-431 and 6kHz FL-430). By changing the first IF filter width according to the operating mode, the desired signal is protected from the influence of nearby strong stations. The 3kHz first IF filter is especially effective in the CW and SSB modes. (Fixed for 15kHz in FM mode.)* in 14MHz High frequency stability A high stability TCXO crystal oscillator provides ±0.5ppm of high frequency stability over a wide temperature range (0°C to +50°C). This allows for a long stable operating time in modes such as RTTY. Large, multi-function LCD The display increases in width from the IC-746PRO/7400. The large multi-function LCD shows frequency, 9-character channel name, channel number, multi functional meter (includes S-meter, RF output, SWR and ALC level). The dot-matrix portion of the LCD shows the following items: Channel name Band scope Memory keyer contents Function key assignment RTTY decoder screen Graphical SWR scale Simple band scope The built-in simple band scope shows the band condition at a glance and is handy for searching for active stations. RTTY demodulator and decoder The built-in RTTY demodulator and decoder allows you to instantly read an RTTY message on the display. No external units or PC required. The built-in tuning indicator visually helps in critical tuning. Ample CW functions All of the following CW capabilities are included in the IC-7410 Large CW PITCH knob and independent BK-IN (break-in) delay knob improve operating efficiency CW wave form controlled by the DSP 4 keyer channels with 70 characters of transmit memory per channel Multi-function electronic keyer with adjustable keying speed from 6-48 wpm, dot-dash ratio from 1:1:2.8 to 1:1:4.5 and paddle polarity Bug keyer and full break-in function Continuously adjustable CW pitch control from 300-900Hz Double key jacks (front and rear panels) CW reverse Built-in antenna tuner The internal antenna tuner covers from 1.8MHz to 54MHz and automatically tunes for low SWR. Variable capacitors provide higher accuracy than a typical mechanical relay tuner. Once you transmit on a frequency, the tuner can instantly retune the frequency using its built-in memory. USB connector for PC control The IC-7410 has a standard type B USB connector and can be connected to a PC. Modulation input, audio output, RTTY demodulator output and CI-V command can be controlled via the USB cable. Also, the conventional CI-V remote control jack is built-in to the IC-7410.Download the USB Driver Large heat sink When compared to the IC-746PRO/7400, the IC-7410's large heat sink improves heat dissipation. Even during long hours of heavy-duty cycle operation, the IC-7410 provides stable output power. Optional RS-BA1 IP remote control software The optional RS-BA1 allows you to use the IC-7410 from another room using your home network or even from a remote location over the Internet. Most settings such as filter width, AGC constant, etc., can be controlled from your PC.   Other outstanding features Built-in voice synthesizer announces operating frequency, mode and S-meter level User programmable band edge beep (can be disabled) VSC (Voice Squelch Control) function RF speech compressor Microphone equalizer and adjustable transmit bandwidth Two preamplifier types: Preamp 1: Increases low level signal improving intermodulation characteristics, Preamp 2: High gain preamplifier 20dB built-in attenuator Audio equalizer function CTCSS and DTCS tone encoder and decoder Triple band stacking register Quick split function and frequency lock function RIT and ΔTx variable up to ±9.999kHz SSB/CW synchronous tuning automatically shifts the carrier point when switching between CW and LSB/USB modes 1Hz pitch tuning steps Program scan, memory scan, select memory scan, mode select scan and Δf scan Automatic tuning steps AH-4 control circuit Large independent MIC/RF power and Notch knobs Rear panel Tuner Socket DC Power Socket Ground Terminal Antenna Connectors Key Jack ALC Input Jack Send Control Jack Accessory Socket CI-V Remote Control Jack USB Connector External Speaker Jack       MTC is an authorized ICOM Dealer for factory reconditioned/refurbished (repacked) and warranted radio equipment and accessories.        ICOM reconditioned/refurbished equipment sold by MTC is covered by a full factory warranty for 90-Days from date of sale, and has been completely reconditioned tested and calibrated by ICOM factory service technicians. In addition to being tested and calibrated any available upgrades and/or firmware updates will be installed by ICOM factory service technicians.       FREE Shipping on ICOM Amateur radios and receivers to continental (lower 48)United States.       There are three Repack condition levels.  Below is a breakdown of these different classifications:       REPACK “A” CONDITION    “Like new”       Like New, No Scratches, Prime Equipment Gift box may have minor Dents, Writing, or Tape, looks like new ALL Accessories Included Owner’s Manual included 90-DAY Warranty from date of consumer purchase, must have proof of purchase       REPACK “B” CONDITION       Slightly used to used appearance, may have some minor scratches Original Gift box may not be included.  (Box may have dents, writing, shipping labels, etc.) ALL MAJOR Accessories included: Base and Mobiles – Power cable and microphone HH’s – Antenna, Battery and Charger MAY NOT have the Owner’s Manual (Downloadable from IA website) 90-DAY Warranty from date of consumer purchase, must have proof of purchase       REPACK “C” CONDITION        Used to well used appearance, may have some minor scratches or show signs of use Original Gift box may not be included.  (Box may have major dents, writing, shipping labels, etc.) ALL MAJOR Accessories included: Base and Mobiles – Power cable and microphone HH’s – Antenna, Battery and Charger MAY NOT have the Owner’s Manual (Downloadable from IA website) 90-DAY Warranty from date of consumer purchase, must have proof of purchase       The equipment available in this program will be from various replacement programs