Icom RKB M506-41 Black VHF Radio Marine NMEA2000 And AIS Rear Mic Fixed Mount Refurbished

  Icom REPACK “B” CONDITION   Slightly used to used appearance, may have some minor scratches Original Gift box may not be included.  (Box may have dents, writing, shipping labels, etc.) ALL MAJOR Accessories included: Base and Mobiles – Power cable and microphone HH’s – Antenna, Battery and Charger MAY NOT have the Owner’s Manual (Downloadable from IA website) 90-DAY Warranty from date of consumer purchase, must have proof of purchase   Integrated AIS Receiver With an integrated AIS receiver, the IC-M506 can show AIS vessel traffic information on the display. The AIS target call function allows you to easily set up an individual DSC call. The Plotter, Target list and Danger list can be toggled on the display. In the M506-21 and M506-41 versions only NMEA 2000® and NMEA 0183 Connectivity With the plug-and-play functionality of NMEA 2000 in the NMEA2000 models, the IC-M506 can easily connect to a NMEA 2000 network and interconnect with other equipment. Also the NMEA 0183 input/output can be used for external GPS/NAV interface. The M506-01 only has NMEA 0183. Last Call Voice Recording The last call voice recording function automatically saves the last two minutes of the last incoming call. You can also start recording manually. Active Noise Cancelling The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. 25W Two-Way Hailer When connected to an external hailer horn, you can talk to people on the deck or shore from the radio's microphone and can hear people's reply via the hailer horn. Foghorn and RX speaker functions are also available. Optional COMMANDMIC™ HM-195B/SW The optional COMMANDMIC, HM-195B/SW provides 2nd station capability for using the IC-M506 from a separate cabin or tower. Most functions including DSC and AIS functions can be controlled from the COMMANDMIC and can be used as an intercom between the IC-M506 and the COMMANDMIC. Large LCD and Intuitive User Interface The IC-M506 is equipped with 132x96 pixels dot-matrix display which is larger than the IC-M504 (132x64 pixels). Reading GPS, AIS, DSC and radio menus are easier than ever. The bottom line of the display shows the software key functions and the functions can be toggled with the left and right buttons. More Great Features 80dB (typical) IMD and channel selectivity MA-500TR AIS transponder and Marine-Commander™ compatible IPX8 submersible plus protection (1m depth for 60 minutes) Rear panel microphone version Optional voice scrambler   General Frequency range  Tx  Rx  CH70  AIS1, 2   156.025-157.425MHz156.050-163.275MHz156.525MHz161.975MHz, 162.025MHz  Type of emission  16K0G3E (FM), 16K0G2B (DSC) Usable channels USA, INT, CAN, WX channels Power supply requirement  13.8V DC ±15% Current drain (at 13.8V DC)  Transmit   Receive  5.5A (25W output)1.5A Operating temperature range 20°C to +60°C; 4°F to +140°F Antenna impedance 50Ω (SO-239)  Dimensions (WxHxD)(projections not included) 175x110xTBA mm;6.66x3.14xTBA in. Weight (approx.) TBA  NMEA formats  Input  Output  RMC, GGA, GNS, GLLDSC, DSE    Transmitter Output power 25W or 1W (at 13.8V DC)  Max. freq. deviation ± 5.0 kHz Frequency stability ± 10.0ppm (20°C to +60°C) Spurious emissions Less than -70dBc  Residual modulation  More than 40dB Adjacent channel power  More than 70dB   Receiver Intermediate frequency  1st 21.7MHz, 2nd 450kHz Sensitivity (at 12dB SINAD) 0.22µV typical Squelch sensitivity  Less than 0.32µV Adjacent Ch. selectivity 80dB typical Spurious response 80dB typical Intermodulation rejection  80dB typical Hum and noise ratio More than 40dB Audio output powerat 10% distortion 10W min. with a 4Ω load (External speaker)    Applicable IP Rating